1503618-01 — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

1503618-01: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 1.312 INCHES MAXIMUM IN, shaft_style: ROUND, STEPPED, shaft_length: 1.500 INCHES NOMINAL IN, actuator_type: DUAL CONCENTRIC, body_diameter: 1.031 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-752-3995, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 1503618-01

NSN: 5905-00-752-3995
FSC: 5905 — Resistor
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	1.312 INCHES MAXIMUM IN
shaft_style	ROUND, STEPPED
shaft_length	1.500 INCHES NOMINAL IN
actuator_type	DUAL CONCENTRIC
body_diameter	1.031 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
cubic_measure	1.377 CUBIC INCHES
overall_length	2.843 INCHES MAXIMUM IN
shaft_diameter	0.250 INCHES NOMINAL IN
mounting_method	STANDARD BUSHING
undercut_length	0.375 INCHES NOMINAL IN
fragility_factor	MODERATELY RUGGED
NSN	5905-00-752-3995

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 6.00 INCH-OUNCES IN

•

BODY DIAMETER: 1.031 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

UNDERCUT LENGTH: 0.375 INCHES NOMINAL IN

•

ELECTRICAL RESISTANCE PER SECTION: 500.0 KILOHMS 1ST SECTION AND 5.0 KILOHMS 2ND SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 120.0 ALL SECTIONS

•

SECTION QUANTITY: 2

•

SHAFT DIAMETER: 0.250 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	6.00 INCH-OUNCES IN
BODY DIAMETER	1.031 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH	32.0
UNDERCUT LENGTH	0.375 INCHES NOMINAL IN
ELECTRICAL RESISTANCE PER SECTION	500.0 KILOHMS 1ST SECTION AND 5.0 KILOHMS 2ND SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	120.0 ALL SECTIONS
SECTION QUANTITY	2
SHAFT DIAMETER	0.250 INCHES NOMINAL IN
SHAFT BEARING TYPE	BALL
UNDERCUT DIAMETER	0.125 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 3

1503618-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

JJC83827Reference document

Same NSN cross-reference

Reference document — Secondary reference

83827Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 1503618-01?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1503618-01?

1503618-01 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).

What parts can replace 1503618-01?

There are 3 known substitutes for 1503618-01: 1503618-1, JJC83827, 83827. Substitute compatibility should be verified for your specific system.

What is the NSN for 1503618-01?

1503618-01 is cataloged in the U.S. Government catalog under NSN 5905-00-752-3995. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1503618-01 — RESISTOR,VARIABLE,NONWIRE WOUND,

Request a Quote — 1503618-01