PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 15032S
15032S ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.416 INCHES NOMINAL IN, thread_class: 2B, thread_series: UN, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-843-2051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15032S
NSN: 5310-00-843-2051
FSC: 5310
CAGE: 04627 — HYSTER-YALE GROUP, INC. DIV HYSTER-YALE MATERIALS HANDLING (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.416 INCHES NOMINAL IN
thread_class2B
thread_seriesUN
thread_directionRIGHT-HAND
width_across_flats1.094 INCHES NOMINAL IN
nominal_thread_size0.812 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch16
NSN5310-00-843-2051
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 15032S · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD QUANTITY PER INCH: 16
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
THREAD SERIES: UN
•
NOMINAL THREAD SIZE: 0.812 INCHES IN
•
MATERIAL: STEEL OVERALL
•
THREAD CLASS: 2B
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH16
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
THREAD SERIESUN
NOMINAL THREAD SIZE0.812 INCHES IN
MATERIALSTEEL OVERALL
THREAD CLASS2B
NUT STYLEHEXAGON
WIDTH ACROSS FLATS1.094 INCHES NOMINAL IN
NUT HEIGHT0.416 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
15314Interchangeable
interchangeable cross-reference
interchangeable
53A8-61CInterchangeable
interchangeable cross-reference
interchangeable
1103-2B-2Interchangeable
interchangeable cross-reference
interchangeable
11406Interchangeable
interchangeable cross-reference
interchangeable
2012-T 32Interchangeable
interchangeable cross-reference
interchangeable
12232Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15032S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15032S?
15032S is a NUT,PLAIN,HEXAGON.
What parts can replace 15032S?
There are 18 known substitutes for 15032S: 15314, 53A8-61C, 1103-2B-2 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15032S?
15032S is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-843-2051. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15032S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026