PartsTable
Technical Data Sheet
150300R15030M1 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, housing_bore_diameter: 1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.938 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-286-6830, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
150300R15030M1
NSN: 5330-00-286-6830
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
housing_bore_diameter1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.938 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed1600 FEET PER MINUTE FT
NSN5330-00-286-6830
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 150300R15030M1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1600 FEET PER MINUTE FT
HOUSING BORE DIAMETER: 1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SEAL WIDTH: 0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
CASE STYLE: SQUARE
SEALING ELEMENT STYLE: ANGULAR
ACCOMMODATED SHAFT DIAMETER: 0.938 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
ACCOMMODATED SHAFT MAXIMUM RATED SPEED1600 FEET PER MINUTE FT
HOUSING BORE DIAMETER1.498 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
SEAL WIDTH0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT DIAMETER0.938 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
10095Interchangeable
interchangeable cross-reference
interchangeable
5307KFInterchangeable
interchangeable cross-reference
interchangeable
200BInterchangeable
interchangeable cross-reference
interchangeable
545305Interchangeable
interchangeable cross-reference
interchangeable
545635Interchangeable
interchangeable cross-reference
interchangeable
361-3101-93729PC20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 150300R15030M1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 150300R15030M1?
150300R15030M1 is a SEAL,PLAIN ENCASED.
What parts can replace 150300R15030M1?
There are 12 known substitutes for 150300R15030M1: 10095, 5307KF, 200B and 9 more. Substitute compatibility should be verified for your specific system.
Is 150300R15030M1 still available?
150300R15030M1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 150300R15030M1