PartsTable
Technical Data Sheet
Download PDF

15029828 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

15029828: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER, hole_depth: 0.830 INCHES NOMINAL IN, overall_height: 1.080 INCHES NOMINAL IN, groove_diameter: 0.380 INCHES NOMINAL IN, top_flange_width: 0.060 INCHES NOMINAL IN, outside/top_flange_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-158-0503, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15029828
NSN: 5340-01-158-0503
FSC: 5340 — Hardware, Commercial
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialRUBBER
hole_depth0.830 INCHES NOMINAL IN
overall_height1.080 INCHES NOMINAL IN
groove_diameter0.380 INCHES NOMINAL IN
top_flange_width0.060 INCHES NOMINAL IN
outside/top_flange_diameter0.750 INCHES NOMINAL IN
second_counterbore_diameter0.280 INCHES NOMINAL IN
NSN5340-01-158-0503
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15029828 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 0.750 INCHES NOMINAL IN
•
GROOVE DIAMETER: 0.380 INCHES NOMINAL IN
•
HOLE DEPTH: 0.830 INCHES NOMINAL IN
•
SECOND COUNTERBORE DIAMETER: 0.280 INCHES NOMINAL IN
•
TOP FLANGE WIDTH: 0.060 INCHES NOMINAL IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.080 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.750 INCHES NOMINAL IN
GROOVE DIAMETER0.380 INCHES NOMINAL IN
HOLE DEPTH0.830 INCHES NOMINAL IN
SECOND COUNTERBORE DIAMETER0.280 INCHES NOMINAL IN
TOP FLANGE WIDTH0.060 INCHES NOMINAL IN
MATERIALRUBBER
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
3900684Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 15029828?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15029828?
15029828 is a BUMPER.
What parts can replace 15029828?
There is 1 known substitute for 15029828: 3900684. Substitute compatibility should be verified for your specific system.
What is the NSN for 15029828?
15029828 is cataloged in the U.S. Government catalog under NSN 5340-01-158-0503. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15029828