PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 15024244
15024244 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.500 INCHES NOMINAL IN, pin_overall_diameter: 0.2500 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL, first_end_taper_length: 0.015 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-276-4691, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15024244
NSN: 5315-00-276-4691
FSC: 5315
CAGE: 15280 — NORTHROP GRUMMAN SYSTEMS CORPORATION DIV ES DEFENSIVE SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
first_end_styleCHAMFERED
pin_overall_length0.500 INCHES NOMINAL IN
pin_overall_diameter0.2500 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.015 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-276-4691
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 15024244 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.015 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 303 OVERALL
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL DIAMETER: 0.2500 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER LENGTH0.015 INCHES NOMINAL IN
MATERIALSTEEL COMP 303 OVERALL
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL DIAMETER0.2500 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.500 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
29041Interchangeable
interchangeable cross-reference
interchangeable
379504Interchangeable
interchangeable cross-reference
interchangeable
ZB0379504Interchangeable
interchangeable cross-reference
interchangeable
1042FPC2Interchangeable
interchangeable cross-reference
interchangeable
1277291Interchangeable
interchangeable cross-reference
interchangeable
8030PL0843131Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15024244?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15024244?
15024244 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 15024244?
There are 9 known substitutes for 15024244: 29041, 379504, ZB0379504 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15024244?
15024244 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-276-4691. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15024244

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026