PartsTable
Technical Data Sheet
1502-1 ✓ Verified by PartsTable
schleich · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The agustinia had upright spines along its back, just like the agustinia from schleich® DINOSAURS.<br><br>The long, narrow spines of the agustinia make it look so unique that it is impossible to mix up with any other dinosaur. It was also covered with unusual-looking ossified skin plates. As a harmless herbivore it probably needed the spines and plates to protect against other carnivorous dinosaurs.

The agustinia from schleich® DINOSAURS is also always ready to defend itself! This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6734, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 1502-1
NSN: 3110-00-155-6734
FSC: 3110
CAGE: 45320 — PACCAR GOVERNMENT GROUP CO YARROW BAY OFFICE PK (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
point_typeCONVENTIONAL
scale_typeETCHED STEM
cooling_finNOT INCLUDED
design_typeFLUCTUATING
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
swage_depth0.062 INCHES IN
flute_length3.625 INCHES NOMINAL IN
recess_depth0.020 INCHES NOMINAL IN
balancing_padNOT INCLUDED
NSN3110-00-155-6734
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1502-1 · schleich ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
BORE DIAMETER: 50.00 MILLIMETERS NOMINAL MM
MATERIAL: STEEL INNER RING
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
SURFACE FINISH: GROUND
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER50.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL INNER RING
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OUTER RING
SURFACE FINISHGROUND
OVERALL WIDTH20.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL BALL
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP DESIGNATIONSTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 38
0903772Interchangeable
interchangeable cross-reference
interchangeable
77661Interchangeable
interchangeable cross-reference
interchangeable
2022Interchangeable
interchangeable cross-reference
interchangeable
864DPC12Interchangeable
interchangeable cross-reference
interchangeable
000279500Interchangeable
interchangeable cross-reference
interchangeable
863DPC12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1502-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1502-1?
1502-1 is a FILTER,RADIO FREQUENCY INTERFERE manufactured by schleich. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1502-1?
There are 38 known substitutes for 1502-1: 0903772, 77661, 2022 and 35 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1502-1?
1502-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6734. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1502-1