PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 15017462
15017462 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, design_type: THREADED, thread_class: 3B, overall_diameter: 0.938 INCHES NOMINAL IN, inside_diameter_length: 0.719 INCHES NOMINAL IN, round_cap_outside_surface_condition: RIBBED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-727-4777, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15017462
NSN: 5340-00-727-4777
FSC: 5340
CAGE: Z8518 — BAE SYSTEMS AUSTRALIA LIMITED (AUS)
SPECIFICATIONS
materialPLASTIC
design_typeTHREADED
thread_class3B
overall_diameter0.938 INCHES NOMINAL IN
inside_diameter_length0.719 INCHES NOMINAL IN
round_cap_outside_surface_conditionRIBBED
thread_size_and_series/type_designator7/8-14 UNF
NSN5340-00-727-4777
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15017462 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 7/8-14 UNF
•
INSIDE DIAMETER LENGTH: 0.719 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: RIBBED
•
MATERIAL: PLASTIC
•
OVERALL DIAMETER: 0.938 INCHES NOMINAL IN
•
THREAD CLASS: 3B
•
DESIGN TYPE: THREADED
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SIZE AND SERIES/TYPE DESIGNATOR7/8-14 UNF
INSIDE DIAMETER LENGTH0.719 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONRIBBED
MATERIALPLASTIC
OVERALL DIAMETER0.938 INCHES NOMINAL IN
THREAD CLASS3B
DESIGN TYPETHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
CD10Interchangeable
interchangeable cross-reference
interchangeable
5340PL0847229Interchangeable
interchangeable cross-reference
interchangeable
MIL-C-5501/11Interchangeable
interchangeable cross-reference
interchangeable
N351CD10Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15017462?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15017462?
15017462 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 15017462?
There are 4 known substitutes for 15017462: CD10, 5340PL0847229, MIL-C-5501/11 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15017462?
15017462 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-727-4777. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15017462

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026