PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 15013SA
15013SA ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.468 INCHES NOMINAL IN, outside_diameter: 4.008 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 4.003 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-417-8232, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15013SA
NSN: 5330-00-417-8232
FSC: 5330
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT A
case_styleSQUARE
seal_width0.468 INCHES NOMINAL IN
outside_diameter4.008 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter4.003 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter3.000 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-417-8232
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15013SA MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.468 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 4.008 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT A
•
ACCOMMODATED SHAFT DIAMETER: 3.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
HOUSING BORE DIAMETER: 4.003 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.468 INCHES NOMINAL IN
OUTSIDE DIAMETER4.008 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
ACCOMMODATED SHAFT DIAMETER3.000 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL CASE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
HOUSING BORE DIAMETER4.003 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
SEALING ELEMENT STYLEANGULAR-OPPOSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
714-02Interchangeable
interchangeable cross-reference
interchangeable
E2896PC89Interchangeable
interchangeable cross-reference
interchangeable
29952Interchangeable
interchangeable cross-reference
interchangeable
E3052PC89Interchangeable
interchangeable cross-reference
interchangeable
5274Interchangeable
interchangeable cross-reference
interchangeable
29909Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15013SA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15013SA?
15013SA is a SEAL,PLAIN ENCASED.
What parts can replace 15013SA?
There are 15 known substitutes for 15013SA: 714-02, E2896PC89, 29952 and 12 more. Substitute compatibility should be verified for your specific system.
Is 15013SA still available?
15013SA is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15013SA

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026