PartsTable
Technical Data Sheet
15003 ✓ Verified by PartsTable
schleich · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Of all animals that ever lived on earth, the Therizinosaurus probably had the longest claws.<br><br>Of all animals that ever lived on earth, the Therizinosaurus probably had the longest claws. It used them to dig, grasp, pierce, and peel off bark. It lived towards the end of the dinosaur age, together with other herbivores such as the Kentrosaurus and Pentaceratops.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-010-3320, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO MRO_GENERAL 15003
NSN: 5310-00-010-3320
FSC: 5310
CAGE: 20272 — DOUGLAS DYNAMICS CORP WESTERN PRODUCTS DIV (USA)
SPECIFICATIONS
colorWHITE MARKER OVERALL
phaseSINGLE
length3.750 INCHES NOMINAL IN
diameter0.312 INCHES NOMINAL IN
materialSTEEL FLOW CONTROL DEVICE
body_styleCYLINDRICAL
bore_shapeSTRAIGHT
case_styleSQUARE
point_typeCONVENTIONAL
seal_width0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
body_length0.500 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
NSN5310-00-010-3320
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 15003 · schleich ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL THICKNESS: 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA: 2 STYLE AND A CLASS
MATERIAL: STEEL CORROSION RESISTING OVERALL
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
HOLE DIAMETER: 0.318 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
OUTSIDE DIAMETER: 0.586 INCHES MAXIMUM IN
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA2 STYLE AND A CLASS
MATERIALSTEEL CORROSION RESISTING OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
HOLE DIAMETER0.318 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.586 INCHES MAXIMUM IN
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
316-1-2PInterchangeable
interchangeable cross-reference
interchangeable
615AInterchangeable
interchangeable cross-reference
interchangeable
40049Interchangeable
interchangeable cross-reference
interchangeable
X528Interchangeable
interchangeable cross-reference
interchangeable
M22520/10-104Interchangeable
interchangeable cross-reference
interchangeable
MIL-C-22520/10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15003?
15003 is a RESISTOR,FIXED,WIRE WOUND manufactured by schleich. It is classified as a MRO (MRO_GENERAL).
What parts can replace 15003?
There are 29 known substitutes for 15003: 316-1-2P, 615A, 40049 and 26 more. Substitute compatibility should be verified for your specific system.
Is 15003 still available?
15003 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15003