PartsTable
Technical Data Sheet
PartsTable / MRO / 150010
150010 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CAPACITOR,FIXED,ELECTROLYTIC is a the manufacturer cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.180 INCHES MAXIMUM IN, body_height: 0.203 INCHES MAXIMUM IN, body_length: 0.203 INCHES MAXIMUM IN, design_type: FRICTION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-111-5829, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 150010
NSN: 5340-00-111-5829
FSC: 5340
CAGE: 15819 — SINCLAIR & RUSH, INC. DBA SINCLAIR & RUSH INC (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.180 INCHES MAXIMUM IN
body_height0.203 INCHES MAXIMUM IN
body_length0.203 INCHES MAXIMUM IN
design_typeFRICTION
hole_diameter0.120 INCHES NOMINAL IN
overall_width1.219 INCHES NOMINAL IN
physical_formLIQUID
overall_height0.812 INCHES NOMINAL IN
overall_length1.563 INCHES NOMINAL IN
mounting_methodSADDLE
NSN5340-00-111-5829
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 150010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.500 INCHES NOMINAL IN
•
INSIDE DIAMETER LENGTH: 0.625 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: VINYLITE, 97945 MFR REF SINGLE MATERIAL RESPONSE
•
MATERIAL: PLASTIC
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPEFRICTION
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.500 INCHES NOMINAL IN
INSIDE DIAMETER LENGTH0.625 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONVINYLITE, 97945 MFR REF SINGLE MATERIAL RESPONSE
MATERIALPLASTIC
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
8ABInterchangeable
interchangeable cross-reference
interchangeable
1200-0727Interchangeable
interchangeable cross-reference
interchangeable
A53656BInterchangeable
interchangeable cross-reference
interchangeable
150010Interchangeable
interchangeable cross-reference
interchangeable
15-010Interchangeable
interchangeable cross-reference
interchangeable
2N3390Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 150010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 150010?
150010 is a CAPACITOR,FIXED,ELECTROLYTIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 150010?
There are 18 known substitutes for 150010: 8AB, 1200-0727, A53656B and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 150010?
150010 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-111-5829. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 150010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026