PartsTable
Technical Data Sheet
PartsTable / MRO / 1500-72

1500-72 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

INSERT,PUNCH HAMMER,TELETYPEWRIT. Key specifications include special_features: ONE 0.112 IN. DIA THRU HOLE IN CENTER IN, general_characteristics_item_description: METAL ALLOY; 0.134 IN.

H; 0.256 IN. DIA IN. This part is cataloged in the Federal Logistics Information System under NSN 3110-00-100-0743, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1500-72
NSN: 3110-00-100-0743
FSC: 3110
CAGE: 58275 — SASCO INC CANADIAN DIV
SPECIFICATIONS
special_featuresONE 0.112 IN. DIA THRU HOLE IN CENTER IN
general_characteristics_item_descriptionMETAL ALLOY; 0.134 IN. H; 0.256 IN. DIA IN
NSN3110-00-100-0743
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1500-72 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.0100 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CONE WIDTH1.0100 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.5000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
2548-101InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
216-30604-1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
2548InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
15274InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1941602InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
94231-1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1500-72?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1500-72?
1500-72 is a INSERT,PUNCH HAMMER,TELETYPEWRIT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1500-72?
There are 23 known substitutes for 1500-72: 2548-101, 216-30604-1, 2548 and 20 more. Substitute compatibility should be verified for your specific system.
Is 1500-72 still available?
1500-72 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1500-72

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026