PartsTable
Technical Data Sheet
Download PDF

150-6404646-8 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

150-6404646-8: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 2.188 INCHES NOMINAL IN, diameter: 1.245 INCHES MINIMUM AND 1.247 INCHES MAXIMUM IN, material: NICKEL OVERALL, head_style: SQUARE, head_width: 1.374 INCHES NOMINAL IN, special_features: TWO HOLES IN HEAD, BOTH HOLES DIAMETERS 0.279. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-399-6121, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
150-6404646-8
NSN: 5315-01-399-6121
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
height2.188 INCHES NOMINAL IN
diameter1.245 INCHES MINIMUM AND 1.247 INCHES MAXIMUM IN
materialNICKEL OVERALL
head_styleSQUARE
head_width1.374 INCHES NOMINAL IN
special_featuresTWO HOLES IN HEAD, BOTH HOLES DIAMETERS 0.279
style_designatorSTRAIGHT
under_head_length3.750 INCHES NOMINAL IN
NSN5315-01-399-6121
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 150-6404646-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD WIDTH: 1.374 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 3.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
DIAMETER: 1.245 INCHES MINIMUM AND 1.247 INCHES MAXIMUM IN
•
HEAD STYLE: SQUARE
•
HEIGHT: 2.188 INCHES NOMINAL IN
•
MATERIAL: NICKEL OVERALL
TECHNICAL CHARACTERISTICS
HEAD WIDTH1.374 INCHES NOMINAL IN
UNDER HEAD LENGTH3.750 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
DIAMETER1.245 INCHES MINIMUM AND 1.247 INCHES MAXIMUM IN
HEAD STYLESQUARE
HEIGHT2.188 INCHES NOMINAL IN
SPECIAL FEATURESTWO HOLES IN HEAD, BOTH HOLES DIAMETERS 0.279
MATERIALNICKEL OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
211039020Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 150-6404646-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 150-6404646-8?
150-6404646-8 is a PIN,STRAIGHT,HEADED.
What parts can replace 150-6404646-8?
There is 1 known substitute for 150-6404646-8: 211039020. Substitute compatibility should be verified for your specific system.
What is the NSN for 150-6404646-8?
150-6404646-8 is cataloged in the U.S. Government catalog under NSN 5315-01-399-6121. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 150-6404646-8