PartsTable
Technical Data Sheet
Download PDF

150-618FFITEM84 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

150-618FFITEM84: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.050 INCHES NOMINAL IN, hole_diameter: 1.125 INCHES NOMINAL IN, overall_diameter: 2.125 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-167-8435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
150-618FFITEM84
NSN: 5310-00-167-8435
FSC: 5310 — Nuts and Washers
CAGE: 27235 — HARDIE-TYNES CO., INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.050 INCHES NOMINAL IN
hole_diameter1.125 INCHES NOMINAL IN
overall_diameter2.125 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-167-8435
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 150-618FFITEM84 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 2.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 1.125 INCHES NOMINAL IN
•
THICKNESS: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER2.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER1.125 INCHES NOMINAL IN
THICKNESS0.050 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 9
150-434YPC193Reference document
Same NSN cross-reference
Reference document — Secondary reference
150-417KPC193Reference document
Same NSN cross-reference
Reference document — Secondary reference
150-417FFPC193Reference document
Same NSN cross-reference
Reference document — Secondary reference
20-193Reference document
Same NSN cross-reference
Reference document — Secondary reference
150-618FITEM84Reference document
Same NSN cross-reference
Reference document — Secondary reference
150-417GPC193Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 150-618FFITEM84?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 150-618FFITEM84?
150-618FFITEM84 is a WASHER,FLAT.
What parts can replace 150-618FFITEM84?
There are 9 known substitutes for 150-618FFITEM84: 150-434YPC193, 150-417KPC193, 150-417FFPC193 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 150-618FFITEM84?
150-618FFITEM84 is cataloged in the U.S. Government catalog under NSN 5310-00-167-8435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 150-618FFITEM84

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.