PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 150-570YPC240
150-570YPC240 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: STEEL, design_type: THREADED, thread_class: 2B, width_across_flats: 2.375 INCHES NOMINAL IN, inside_diameter_length: 2.000 INCHES NOMINAL IN, thread_size_and_series/type_designator: 2.000-10 UNS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-097-0935, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
150-570YPC240
NSN: 5340-00-097-0935
FSC: 5340
CAGE: 27235 — HARDIE-TYNES CO., INC. (USA)
SPECIFICATIONS
materialSTEEL
design_typeTHREADED
thread_class2B
width_across_flats2.375 INCHES NOMINAL IN
inside_diameter_length2.000 INCHES NOMINAL IN
thread_size_and_series/type_designator2.000-10 UNS
NSN5340-00-097-0935
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 150-570YPC240 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2B
•
MATERIAL: STEEL
•
DESIGN TYPE: THREADED
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 2.000-10 UNS
•
WIDTH ACROSS FLATS: 2.375 INCHES NOMINAL IN
•
INSIDE DIAMETER LENGTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2B
MATERIALSTEEL
DESIGN TYPETHREADED
THREAD SIZE AND SERIES/TYPE DESIGNATOR2.000-10 UNS
WIDTH ACROSS FLATS2.375 INCHES NOMINAL IN
INSIDE DIAMETER LENGTH2.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
30240Interchangeable
interchangeable cross-reference
interchangeable
188223Interchangeable
interchangeable cross-reference
interchangeable
FFB187/01-TYPE ABMA 02420Interchangeable
interchangeable cross-reference
interchangeable
019-35P125Interchangeable
interchangeable cross-reference
interchangeable
H60MLQ30240Interchangeable
interchangeable cross-reference
interchangeable
A342APC1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 150-570YPC240?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 150-570YPC240?
150-570YPC240 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 150-570YPC240?
There are 24 known substitutes for 150-570YPC240: 30240, 188223, FFB187/01-TYPE ABMA 02420 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 150-570YPC240?
150-570YPC240 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-097-0935. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 150-570YPC240

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026