PartsTable
Technical Data Sheet
150-409ZPC237 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: STEEL, design_type: THREADED, thread_class: 3B, overall_diameter: 1.062 INCHES NOMINAL IN, width_across_flats: 1.062 INCHES NOMINAL IN, inside_diameter_length: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-167-9174, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
150-409ZPC237
NSN: 5340-00-167-9174
FSC: 5340
CAGE: 27235 — HARDIE-TYNES CO., INC. (USA)
SPECIFICATIONS
materialSTEEL
design_typeTHREADED
thread_class3B
overall_diameter1.062 INCHES NOMINAL IN
width_across_flats1.062 INCHES NOMINAL IN
inside_diameter_length0.625 INCHES NOMINAL IN
thread_size_and_series/type_designator0.625-18 UNF
NSN5340-00-167-9174
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 150-409ZPC237 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
WIDTH ACROSS FLATS: 1.062 INCHES NOMINAL IN
INSIDE DIAMETER LENGTH: 0.625 INCHES NOMINAL IN
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 0.625-18 UNF
OVERALL DIAMETER: 1.062 INCHES NOMINAL IN
MATERIAL: STEEL
THREAD CLASS: 3B
DESIGN TYPE: THREADED
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH ACROSS FLATS1.062 INCHES NOMINAL IN
INSIDE DIAMETER LENGTH0.625 INCHES NOMINAL IN
THREAD SIZE AND SERIES/TYPE DESIGNATOR0.625-18 UNF
OVERALL DIAMETER1.062 INCHES NOMINAL IN
MATERIALSTEEL
THREAD CLASS3B
DESIGN TYPETHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
PED SENSOR SPO2,SCPO,SPMETUpgraded Successor
successor cross-reference
successor
2069Upgraded Successor
successor cross-reference
successor
20237Upgraded Successor
successor cross-reference
successor
3F1-10P1Interchangeable
interchangeable cross-reference
interchangeable
R10TYPEGInterchangeable
interchangeable cross-reference
interchangeable
47511-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 150-409ZPC237?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 150-409ZPC237?
150-409ZPC237 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 150-409ZPC237?
There are 23 known substitutes for 150-409ZPC237: PED SENSOR SPO2,SCPO,SPMET, 2069, 20237 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 150-409ZPC237?
150-409ZPC237 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-167-9174. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 150-409ZPC237