PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 150-225-12
150-225-12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM OVERALL, seal_width: 0.375 INCHES NOMINAL IN, construction: ONE-PIECE, housing_bore_diameter: 1.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-883-0506, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
150-225-12
NSN: 5330-00-883-0506
FSC: 5330
CAGE: 99189 — JOHN CRANE-HOUDAILLE INC LAPMASTER INTL DIV (USA)
SPECIFICATIONS
materialRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM OVERALL
seal_width0.375 INCHES NOMINAL IN
constructionONE-PIECE
housing_bore_diameter1.500 INCHES NOMINAL IN
NSN5330-00-883-0506
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 150-225-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.500 INCHES NOMINAL IN
•
CONSTRUCTION: ONE-PIECE
•
MATERIAL: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.375 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.500 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECE
MATERIALRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
48015Interchangeable
interchangeable cross-reference
interchangeable
1416Interchangeable
interchangeable cross-reference
interchangeable
ASTM D1785Interchangeable
interchangeable cross-reference
interchangeable
48245Interchangeable
interchangeable cross-reference
interchangeable
170-008398-P001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 150-225-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 150-225-12?
150-225-12 is a SEAL,PLAIN.
What parts can replace 150-225-12?
There are 5 known substitutes for 150-225-12: 48015, 1416, ASTM D1785 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 150-225-12?
150-225-12 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-883-0506. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 150-225-12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026