PartsTable
Technical Data Sheet
Download PDF

150-111-3 — JACK,TIP

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

150-111-3: JACK,TIP.

The JACK,TIP is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CONTACT, body_style: THREADED BUSHING MOUNTED, body_length: 0.500 INCHES NOMINAL IN, terminal_type: TURRET, overall_length: 0.922 INCHES NOMINAL IN, overall_diameter: 0.281 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5935-00-825-3874, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
150-111-3
NSN: 5935-00-825-3874
NIINs: 008253874, 016199500
FSC: 5935 — Connectors, Electrical
CAGE: 91967 — HALSIT HOLDINGS LLC DIV HALSIT HOLDINGS, LLC DBA ABBATRON (USA)
SPECIFICATIONS
materialCOPPER ALLOY CONTACT
body_styleTHREADED BUSHING MOUNTED
body_length0.500 INCHES NOMINAL IN
terminal_typeTURRET
overall_length0.922 INCHES NOMINAL IN
overall_diameter0.281 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentGOLD CONTACT
nominal_thread_size0.250 INCHES IN
current_rating_in_amps15.0
mounting_bushing_length0.375 INCHES NOMINAL IN
accommodated_finger_typeTEST PROD SINGLE FINGER
NSN5935-00-825-3874
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available JACK,TIP TITLE COMPONENT PN 150-111-3 MFR JACK,TIP
KEY FEATURES
•
IDENTIFICATION CODE COLOR: GRAY/GREY
•
CAPACITANCE IN PICOFARADS: 10.0
•
BODY STYLE: THREADED BUSHING MOUNTED
•
TERMINAL TYPE: TURRET
•
FINGER ACCOMMODATION DIAMETER: 0.080 INCHES NOMINAL ALL FINGERS IN
•
OVERALL DIAMETER: 0.281 INCHES NOMINAL IN
•
FINGER ACCOMMODATION LENGTH: 0.500 INCHES NOMINAL ALL FINGERS IN
•
ACCOMMODATED FINGER TYPE: TEST PROD SINGLE FINGER
TECHNICAL CHARACTERISTICS
IDENTIFICATION CODE COLORGRAY/GREY
CAPACITANCE IN PICOFARADS10.0
BODY STYLETHREADED BUSHING MOUNTED
TERMINAL TYPETURRET
FINGER ACCOMMODATION DIAMETER0.080 INCHES NOMINAL ALL FINGERS IN
OVERALL DIAMETER0.281 INCHES NOMINAL IN
FINGER ACCOMMODATION LENGTH0.500 INCHES NOMINAL ALL FINGERS IN
ACCOMMODATED FINGER TYPETEST PROD SINGLE FINGER
OVERALL LENGTH0.922 INCHES NOMINAL IN
BUSHING ACCOMMODATION HOLE SHAPEROUND
SUBSTITUTES & CROSS-REFERENCES 2
5M68A2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
105-213-200Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 150-111-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 150-111-3?
150-111-3 is a JACK,TIP.
What parts can replace 150-111-3?
There are 2 known substitutes for 150-111-3: 5M68A2, 105-213-200. Substitute compatibility should be verified for your specific system.
What is the NSN for 150-111-3?
150-111-3 is cataloged in the U.S. Government catalog under NSN 5935-00-825-3874. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 150-111-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.