150-100-NP0-470 — CAPACITOR,FIXED,CERAMIC DIELECTR

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

150-100-NP0-470: CAPACITOR,FIXED,CERAMIC DIELECTR.

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.150 INCHES MAXIMUM IN, body_height: 0.100 INCHES MAXIMUM IN, body_length: 0.150 INCHES MAXIMUM IN, terminal_length: 0.360 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-01-327-2144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 150-100-NP0-470

NSN: 5910-01-327-2144
FSC: 5910 — Capacitors
CAGE: 51642 — CENTRE CAPACITOR INC (USA)

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width	0.150 INCHES MAXIMUM IN
body_height	0.100 INCHES MAXIMUM IN
body_length	0.150 INCHES MAXIMUM IN
terminal_length	0.360 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
terminal_diameter	0.016 INCHES NOMINAL IN
reliability_indicator	NOT ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
tolerance_range_per_section	-2.000 TO 2.000 PERCENT SINGLE SECTION
NSN	5910-01-327-2144

COMPONENT DIAGRAM

KEY FEATURES

•

TERMINAL DIAMETER: 0.016 INCHES NOMINAL IN

•

TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS: 0.0 SINGLE SECTION

•

BODY STYLE: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE

•

TOLERANCE RANGE PER SECTION: -2.000 TO 2.000 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 0.360 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN

•

BODY WIDTH: 0.150 INCHES MAXIMUM IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

TERMINAL DIAMETER	0.016 INCHES NOMINAL IN
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	0.0 SINGLE SECTION
BODY STYLE	W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
TOLERANCE RANGE PER SECTION	-2.000 TO 2.000 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	0.360 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
BODY WIDTH	0.150 INCHES MAXIMUM IN
BODY HEIGHT	0.100 INCHES MAXIMUM IN
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	100.0 DC SINGLE SECTION

SUBSTITUTES & CROSS-REFERENCES 1

CN15A470Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 150-100-NP0-470?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 150-100-NP0-470?

150-100-NP0-470 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).

What parts can replace 150-100-NP0-470?

There is 1 known substitute for 150-100-NP0-470: CN15A470. Substitute compatibility should be verified for your specific system.

What is the NSN for 150-100-NP0-470?

150-100-NP0-470 is cataloged in the U.S. Government catalog under NSN 5910-01-327-2144. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

150-100-NP0-470 — CAPACITOR,FIXED,CERAMIC DIELECTR

Request a Quote — 150-100-NP0-470