PartsTable
Technical Data Sheet
Download PDF

150-034-E-005PC10 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

150-034-E-005PC10: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.449 INCHES NOMINAL IN, center_hole_diameter: 1.159 INCHES MINIMUM AND 1.183 INCHES MAXIMUM IN, cross-sectional_height: 0.139 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-054-2589, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
150-034-E-005PC10
NSN: 5331-01-054-2589
FSC: 5331 — O-ring
CAGE: 11839 — BEAIRD INDUSTRIES INC. (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.449 INCHES NOMINAL IN
center_hole_diameter1.159 INCHES MINIMUM AND 1.183 INCHES MAXIMUM IN
cross-sectional_height0.139 INCHES NOMINAL IN
NSN5331-01-054-2589
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 150-034-E-005PC10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.139 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.449 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.159 INCHES MINIMUM AND 1.183 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.139 INCHES NOMINAL IN
OUTSIDE DIAMETER1.449 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.159 INCHES MINIMUM AND 1.183 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
AS568-217MIL-G-21610TY1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 150-034-E-005PC10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 150-034-E-005PC10?
150-034-E-005PC10 is a O-RING.
What parts can replace 150-034-E-005PC10?
There is 1 known substitute for 150-034-E-005PC10: AS568-217MIL-G-21610TY1. Substitute compatibility should be verified for your specific system.
What is the NSN for 150-034-E-005PC10?
150-034-E-005PC10 is cataloged in the U.S. Government catalog under NSN 5331-01-054-2589. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 150-034-E-005PC10