PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 15-8018
15-8018 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

ISOLATOR,RADIO FREQUENCY REFLECT. Key specifications include end_item_identification: CAGE 6T388; CRANE, HYDRAULIC; PN 209SC, part_name_assigned_by_controlling_agency: FILTER, FLUID, PRESSURE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-446-3743, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15-8018
NSN: 5340-00-446-3743
FSC: 5340
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
end_item_identificationCAGE 6T388; CRANE, HYDRAULIC; PN 209SC
part_name_assigned_by_controlling_agencyFILTER, FLUID, PRESSURE
NSN5340-00-446-3743
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15-8018 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH: 2.125 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
SECOND LEG STYLE: CORNER RADIUS
•
FIRST LEG STYLE: CORNER RADIUS
•
SURFACE TREATMENT: PASSIVATE
•
FIRST LEG WIDTH: 1.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH2.125 INCHES NOMINAL IN
SPECIAL FEATURESWINDOW CUT OUT IN 2ND LEG 1.562 IN. W BY 1.250 IN. H IN
FIRST LEG HOLE DIAMETER0.219 INCHES NOMINAL IN
SECOND LEG STYLECORNER RADIUS
FIRST LEG STYLECORNER RADIUS
SURFACE TREATMENTPASSIVATE
FIRST LEG WIDTH1.812 INCHES NOMINAL IN
SECOND LEG HOLE DIAMETER0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
P4676Upgraded Successor
successor cross-reference
successor
15-8018Upgraded Successor
successor cross-reference
successor
5674Upgraded Successor
successor cross-reference
successor
714Interchangeable
interchangeable cross-reference
interchangeable
1701-1750Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15-8018?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15-8018?
15-8018 is a ISOLATOR,RADIO FREQUENCY REFLECT.
What parts can replace 15-8018?
There are 5 known substitutes for 15-8018: P4676, 15-8018, 5674 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15-8018?
15-8018 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-446-3743. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15-8018

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026