PartsTable
Technical Data Sheet
Download PDF

15-5102 — 15-5102

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

15-5102: 15-5102.

The 15-5102 is a the manufacturer industrial component. Key specifications include indicator_type: DIAL W/POINTER, special_markings: RED LINE AT 400, measurement_range: +395.0 TO 405.0 HERTZ SINGLE INDICATOR SINGLE RANGE, fsc_application_data: TEST SET,ELECT. EQUIP..

This part is cataloged in the U.S. Government catalog under NSN 5310-00-825-0368, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 15-5102
NSN: 5310-00-825-0368
NIINs: 008250368, 012993889, 013540932
FSC: 5310 — Nuts and Washers
CAGE: 78710 — TRIUMPH CONTROLS, LLC DBA TRIUMPH CONTROLS, LLC (USA)
SPECIFICATIONS
indicator_typeDIAL W/POINTER
special_markingsRED LINE AT 400
measurement_range+395.0 TO 405.0 HERTZ SINGLE INDICATOR SINGLE RANGE
fsc_application_dataTEST SET,ELECT. EQUIP.
NSN5310-00-825-0368
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 15-5102 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM CENTERLINE TO BOTTOM OF INTERNAL KEYWAY: 0.208 INCHES NOMINAL IN
•
INTERNAL KEYWAY WIDTH: 0.053 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5519 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.125 INCHES NOMINAL IN
•
INTERNAL KEYWAY QUANTITY: 1
•
MATERIAL THICKNESS: 0.008 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 301 OVERALL
•
HOLE DIAMETER: 0.758 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM CENTERLINE TO BOTTOM OF INTERNAL KEYWAY0.208 INCHES NOMINAL IN
INTERNAL KEYWAY WIDTH0.053 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5519 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.125 INCHES NOMINAL IN
INTERNAL KEYWAY QUANTITY1
MATERIAL THICKNESS0.008 INCHES MINIMUM AND 0.012 INCHES MAXIMUM IN
MATERIALSTEEL COMP 301 OVERALL
HOLE DIAMETER0.758 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 15-5102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15-5102?
15-5102 is a 15-5102. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 15-5102?
15-5102 is cataloged in the U.S. Government catalog under NSN 5310-00-825-0368. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15-5102

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.