PartsTable
Technical Data Sheet
Download PDF

15-5-2-0-4 — GEAR,SPUR

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

15-5-2-0-4: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, overall_height: 0.0354 INCHES MINIMUM AND 0.0394 INCHES MAXIMUM IN, outside_diameter: 0.584 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN, style_designator: SPRING TENSION, material_thickness: 0.0142 INCHES MINIMUM AND 0.0172 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-143-6313, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15-5-2-0-4
NSN: 5310-00-143-6313
NIINs: 001436313, 013003880
FSC: 5310 — Nuts and Washers
CAGE: 07271 — NEISE KARL A INC
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
overall_height0.0354 INCHES MINIMUM AND 0.0394 INCHES MAXIMUM IN
outside_diameter0.584 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN
style_designatorSPRING TENSION
material_thickness0.0142 INCHES MINIMUM AND 0.0172 INCHES MAXIMUM IN
NSN5310-00-143-6313
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 15-5-2-0-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPRING TENSION
•
OUTSIDE DIAMETER: 0.584 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.0142 INCHES MINIMUM AND 0.0172 INCHES MAXIMUM IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
HOLE DIAMETER: 0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.0354 INCHES MINIMUM AND 0.0394 INCHES MAXIMUM IN
STYLE DESIGNATORSPRING TENSION
OUTSIDE DIAMETER0.584 INCHES MINIMUM AND 0.591 INCHES MAXIMUM IN
MATERIAL THICKNESS0.0142 INCHES MINIMUM AND 0.0172 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
HOLE DIAMETER0.205 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
5310001436313Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 15-5-2-0-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15-5-2-0-4?
15-5-2-0-4 is a GEAR,SPUR.
What parts can replace 15-5-2-0-4?
There is 1 known substitute for 15-5-2-0-4: 5310001436313. Substitute compatibility should be verified for your specific system.
What is the NSN for 15-5-2-0-4?
15-5-2-0-4 is cataloged in the U.S. Government catalog under NSN 5310-00-143-6313. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15-5-2-0-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.