PartsTable
Technical Data Sheet
PartsTable / MRO / 15-119
15-119 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: STEEL OVERALL, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, cone_width: 0.8125 INCHES NOMINAL IN, point_type: CONVENTIONAL, body_length: 0.562 INCHES NOMINAL IN, point_angle: 118.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 15-119
NSN: 3110-00-100-3159
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
cone_width0.8125 INCHES NOMINAL IN
point_typeCONVENTIONAL
body_length0.562 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
unit_designRACK MOUNTED
flute_length4.000 INCHES NOMINAL IN
thread_class2A A
body_diameter0.250 INCHES NOMINAL IN
bore_diameter1.1895 INCHES NOMINAL IN
NSN3110-00-100-3159
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 15-119 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 0.8125 INCHES NOMINAL IN
•
BORE DIAMETER: 1.1895 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0600 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH0.8125 INCHES NOMINAL IN
BORE DIAMETER1.1895 INCHES NOMINAL IN
CONE CORNER RADIUS0.0600 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
51078Interchangeable
interchangeable cross-reference
interchangeable
15250Interchangeable
interchangeable cross-reference
interchangeable
404Interchangeable
interchangeable cross-reference
interchangeable
70419Interchangeable
interchangeable cross-reference
interchangeable
70400Interchangeable
interchangeable cross-reference
interchangeable
15-119Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15-119?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15-119?
15-119 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 15-119?
There are 13 known substitutes for 15-119: 51078, 15250, 404 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15-119?
15-119 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15-119

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026