PartsTable
Technical Data Sheet
PartsTable / MRO / 15-1001
15-1001 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The TRANSFORMER,RADIO FREQUENCY is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-015-1001, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 15-1001
NSN: 5305-00-015-1001
FSC: 5305
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
Part Number15-1001
NSN5305-00-015-1001
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 15-1001 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD HEIGHT: 0.139 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
HEAD DIAMETER: 0.407 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
•
FASTENER LENGTH: 0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
HEAD STYLE: PAN
TECHNICAL CHARACTERISTICS (FLIS)
NONMACHINE NOMINAL THREAD DIAMETER0.216 INCHES IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD HEIGHT0.139 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
HEAD DIAMETER0.407 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
FASTENER LENGTH0.953 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
HEAD STYLEPAN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
149926Interchangeable
interchangeable cross-reference
interchangeable
ANSI-B18.6.1Interchangeable
interchangeable cross-reference
interchangeable
MS35493-230Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111Interchangeable
interchangeable cross-reference
interchangeable
15100-1Interchangeable
interchangeable cross-reference
interchangeable
73357Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15-1001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15-1001?
15-1001 is a TRANSFORMER,RADIO FREQUENCY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 15-1001?
There are 15 known substitutes for 15-1001: 149926, ANSI-B18.6.1, MS35493-230 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15-1001?
15-1001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-015-1001. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15-1001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026