PartsTable
Technical Data Sheet
PartsTable / MRO / 15-0674
15-0674 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PUSH BUTTON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.142 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, outside_diameter: 0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: CADMIUM OVERALL, material_thickness: 0.016 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0876, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 15-0674
NSN: 5310-00-167-0876
FSC: 5310
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.142 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
outside_diameter0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentCADMIUM OVERALL
material_thickness0.016 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
NSN5310-00-167-0876
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 15-0674 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
OUTSIDE DIAMETER: 0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
HOLE DIAMETER: 0.142 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.016 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
OUTSIDE DIAMETER0.275 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
HOLE DIAMETER0.142 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
MATERIAL THICKNESS0.016 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
115543Interchangeable
interchangeable cross-reference
interchangeable
857WInterchangeable
interchangeable cross-reference
interchangeable
0912729Interchangeable
interchangeable cross-reference
interchangeable
1206Interchangeable
interchangeable cross-reference
interchangeable
221-6Interchangeable
interchangeable cross-reference
interchangeable
551-90394Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15-0674?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15-0674?
15-0674 is a PUSH BUTTON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 15-0674?
There are 28 known substitutes for 15-0674: 115543, 857W, 0912729 and 25 more. Substitute compatibility should be verified for your specific system.
Is 15-0674 still available?
15-0674 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15-0674

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026