PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 15-0.125
15-0.125 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The 15-0.125 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-816-4241, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15-0.125
NSN: 5325-00-816-4241
FSC: 5325
CAGE: 77969 — RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. DBA RUBBERCRAFT CORP (USA)
SPECIFICATIONS
Part Number15-0.125
NSN5325-00-816-4241
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 15-0.125 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
GROOVE OUTSIDE DIAMETER: 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 96906-MS35490/CANCELED/ GOVERNMENT STANDARD
•
LARGE FLANGE OUTSIDE DIAMETER: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
•
NONMETALLIC HARDNESS RATING: 45.0 MINIMUM SHORE DUROMETER A AND 55.0 MAXIMUM SHORE DUROMETER A
•
FLANGE THICKNESS: 0.055 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
OVERALL HEIGHT0.219 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
GROOVE OUTSIDE DIAMETER0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA96906-MS35490/CANCELED/ GOVERNMENT STANDARD
LARGE FLANGE OUTSIDE DIAMETER0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
HOLE DIAMETER0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM IN
NONMETALLIC HARDNESS RATING45.0 MINIMUM SHORE DUROMETER A AND 55.0 MAXIMUM SHORE DUROMETER A
FLANGE THICKNESS0.055 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
GROMMET STYLEROUND
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D735-58T GRADE SB510A1B1F2 NATIONAL SPEC SINGLE MATERIAL RESPONSE OR SAE J14 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
MS35489-35Interchangeable
interchangeable cross-reference
interchangeable
6026-7055-8Interchangeable
interchangeable cross-reference
interchangeable
K7822949-8Interchangeable
interchangeable cross-reference
interchangeable
359-1001-1ZInterchangeable
interchangeable cross-reference
interchangeable
5325PL0718997Interchangeable
interchangeable cross-reference
interchangeable
12Z12002-28Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15-0.125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15-0.125?
15-0.125 is a 15-0.125.
What parts can replace 15-0.125?
There are 11 known substitutes for 15-0.125: MS35489-35, 6026-7055-8, K7822949-8 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15-0.125?
15-0.125 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-816-4241. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15-0.125

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026