PartsTable
Technical Data Sheet
14X ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SWITCH,LIQUID LEVEL is a the manufacturer industrial component. Key specifications include material: PLASTIC, actuation_method: BUOYANCY, ac_voltage_rating: 110.0 VOLTS MAXIMUM FIRST OPERATING POWER RQMT, length_under_shoulder: 1.274 INCHES MINIMUM AND 1.294 INCHES MAXIMUM IN, open_end_inside_diameter: 1.103 INCHES MINIMUM AND 1.123 INCHES MAXIMUM IN, closed_end_overall_diameter: 1.175 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-3506, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 14X
NSN: 5340-00-286-3506
FSC: 5340
CAGE: 95760 — PROTECTIVE CLOSURES CO INC (USA)
SPECIFICATIONS
materialPLASTIC
float_quantity1
actuation_methodBUOYANCY
ac_voltage_rating110.0 VOLTS MAXIMUM FIRST OPERATING POWER RQMT
length_under_shoulder1.274 INCHES MINIMUM AND 1.294 INCHES MAXIMUM IN
open_end_inside_diameter1.103 INCHES MINIMUM AND 1.123 INCHES MAXIMUM IN
closed_end_overall_diameter1.175 INCHES NOMINAL IN
liquid_type_for_which_designedWATER
NSN5340-00-286-3506
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14X MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
LENGTH UNDER SHOULDER: 1.274 INCHES MINIMUM AND 1.294 INCHES MAXIMUM IN
CLOSED END OVERALL DIAMETER: 1.175 INCHES NOMINAL IN
OPEN END INSIDE DIAMETER: 1.103 INCHES MINIMUM AND 1.123 INCHES MAXIMUM IN
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH UNDER SHOULDER1.274 INCHES MINIMUM AND 1.294 INCHES MAXIMUM IN
CLOSED END OVERALL DIAMETER1.175 INCHES NOMINAL IN
OPEN END INSIDE DIAMETER1.103 INCHES MINIMUM AND 1.123 INCHES MAXIMUM IN
MATERIALPLASTIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
NAS844-8Upgraded Successor
successor cross-reference
successor
NAS847Upgraded Successor
successor cross-reference
successor
102C1279-1Upgraded Successor
successor cross-reference
successor
8028447Upgraded Successor
successor cross-reference
successor
353122-4Upgraded Successor
successor cross-reference
successor
17SUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14X?
14X is a SWITCH,LIQUID LEVEL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 14X?
There are 27 known substitutes for 14X: NAS844-8, NAS847, 102C1279-1 and 24 more. Substitute compatibility should be verified for your specific system.
Is 14X still available?
14X is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14X