PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 14T
14T ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, unit_type: STIPPLE SHEET, hole_diameter: 0.224 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN, overall_width: 2.580 INCHES IN, overall_length: 6.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-044-6170, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14T
NSN: 5310-00-044-6170
FSC: 5310
CAGE: 89346 — NAVISTAR INTL CORP TRUCK BR OHIO PLANT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
unit_typeSTIPPLE SHEET
hole_diameter0.224 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
overall_width2.580 INCHES IN
overall_length6.000 INCHES NOMINAL IN
overall_diameter0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM IN
special_featuresLOCKING PLIERS; LONG NOSE; FAST RELEASE MECHANISM; NON-SLIP HANDLE GRIPS
basic_shape_styleMECHANICAL COMPRESSION
features_providedWIRE CUTTING FEATURE
surface_treatmentCHROMIUM OVERALL
nut_width_across_flats2.560 INCHES SINGLE END IN
NSN5310-00-044-6170
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 14T · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM IN
•
CENTER HOLE SHAPE STYLE: ROUND
•
PERIPHERAL SHAPE STYLE: ROUND
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY SURFACE TREATMENT
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
•
HOLE DIAMETER: 0.224 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.521 INCHES MINIMUM AND 0.541 INCHES MAXIMUM IN
CENTER HOLE SHAPE STYLEROUND
PERIPHERAL SHAPE STYLEROUND
NONDEFINITIVE SPEC/STD DATAA TYPE
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY SURFACE TREATMENT
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
HOLE DIAMETER0.224 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
THICKNESS0.036 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
14TInterchangeable
interchangeable cross-reference
interchangeable
C-1000Interchangeable
interchangeable cross-reference
interchangeable
DS100Interchangeable
interchangeable cross-reference
interchangeable
1000WInterchangeable
interchangeable cross-reference
interchangeable
1881-409Interchangeable
interchangeable cross-reference
interchangeable
446170Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14T?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14T?
14T is a RESISTOR,FIXED,WIRE WOUND.
What parts can replace 14T?
There are 10 known substitutes for 14T: 14T, C-1000, DS100 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14T?
14T is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-044-6170. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14T

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026