14C1-1008 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

14C1-1008: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.625 INCHES NOMINAL IN, shaft_style: ROUND, shaft_length: 0.500 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 0.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-018-9270, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 14C1-1008

NSN: 5905-00-018-9270
FSC: 5905 — Resistor
CAGE: 19006 — GULF AND WESTERN MFG CO EAGLE SIGNAL SYSTEMS DIV (USA)

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	0.625 INCHES NOMINAL IN
shaft_style	ROUND
shaft_length	0.500 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
body_diameter	0.875 INCHES NOMINAL IN
shaft_diameter	0.125 INCHES NOMINAL IN
mounting_method	CLAMP RING(S)
section_quantity	1
terminal_location	REAR END LOCATION NOT OTHERWISE SPECIFIED
reliability_indicator	NOT ESTABLISHED
terminal_type_and_quantity	3 TURRET
NSN	5905-00-018-9270

COMPONENT DIAGRAM

KEY FEATURES

•

BODY DIAMETER: 0.875 INCHES NOMINAL IN

•

ELECTRICAL RESISTANCE PER SECTION: 10.0 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.125 INCHES NOMINAL IN

•

BODY STYLE: CYLINDRICAL BUSHING MOUNTED

•

MOUNTING METHOD: CLAMP RING(S)

•

TERMINAL LOCATION: REAR END LOCATION NOT OTHERWISE SPECIFIED

TECHNICAL CHARACTERISTICS

BODY DIAMETER	0.875 INCHES NOMINAL IN
ELECTRICAL RESISTANCE PER SECTION	10.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.125 INCHES NOMINAL IN
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
MOUNTING METHOD	CLAMP RING(S)
TERMINAL LOCATION	REAR END LOCATION NOT OTHERWISE SPECIFIED
SHAFT STYLE	ROUND
ACTUATOR TYPE	SINGLE SHAFT

SUBSTITUTES & CROSS-REFERENCES 6

62246Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

751-6580Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

CP09C158Reference document

Same NSN cross-reference

Reference document — Secondary reference

224001Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

78FTS120Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

224001P1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 14C1-1008?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 14C1-1008?

14C1-1008 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace 14C1-1008?

There are 6 known substitutes for 14C1-1008: 62246, 751-6580, CP09C158 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 14C1-1008?

14C1-1008 is cataloged in the U.S. Government catalog under NSN 5905-00-018-9270. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

14C1-1008 — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — 14C1-1008