PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 14B1 1-2INID
14B1 1-2INID ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The WIRING HARNESS,BRANCHED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE, temp_rating: 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, exterior_color: RED, inside_diameter: 1.500 INCHES NOMINAL IN, outside_diameter: 2.000 INCHES NOMINAL IN, operating_pressure: 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-278-4917, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14B1 1-2INID
NSN: 4720-00-278-4917
FSC: 4720
CAGE: 24161 — GATES CORPORATION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
temp_rating200.0 FAHRENHEIT SINGLE RESPONSE DEGF
exterior_colorRED
inside_diameter1.500 INCHES NOMINAL IN
outside_diameter2.000 INCHES NOMINAL IN
operating_pressure250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure1000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
end_item_identificationGRUMMAN A10 AIRCRAFT
inside_surface_conditionSMOOTH
hydrostatic_test_pressure500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
minimum_inside_bending_radius10.000 INCHES IN
NSN4720-00-278-4917
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 14B1 1-2INID · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BURST TEST PRESSURE: 1000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED SYNTHETIC CORD AND 2ND LAYER BRAIDED SYNTHETIC CORD AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
•
TEMP RATING: 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
OUTSIDE DIAMETER: 2.000 INCHES NOMINAL IN
•
OUTER COVERING ENVIRONMENTAL PROTECTION: GREASE RESISTANT AND HEAT RESISTANT AND LIGHT RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF
•
OPERATING PRESSURE: 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
TECHNICAL CHARACTERISTICS (FLIS)
BURST TEST PRESSURE1000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED SYNTHETIC CORD AND 2ND LAYER BRAIDED SYNTHETIC CORD AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE
TEMP RATING200.0 FAHRENHEIT SINGLE RESPONSE DEGF
END ITEM IDENTIFICATIONGRUMMAN A10 AIRCRAFT
OUTSIDE DIAMETER2.000 INCHES NOMINAL IN
OUTER COVERING ENVIRONMENTAL PROTECTIONGREASE RESISTANT AND HEAT RESISTANT AND LIGHT RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF
OPERATING PRESSURE250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
HYDROSTATIC TEST PRESSURE500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
INSIDE SURFACE CONDITIONSMOOTH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
64560Interchangeable
interchangeable cross-reference
interchangeable
64560/710090Interchangeable
interchangeable cross-reference
interchangeable
16054Interchangeable
interchangeable cross-reference
interchangeable
MH150/U/MEDInterchangeable
interchangeable cross-reference
interchangeable
MX150/U/MEDInterchangeable
interchangeable cross-reference
interchangeable
19B2BRAID1 1-2INInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14B1 1-2INID?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14B1 1-2INID?
14B1 1-2INID is a WIRING HARNESS,BRANCHED.
What parts can replace 14B1 1-2INID?
There are 13 known substitutes for 14B1 1-2INID: 64560, 64560/710090, 16054 and 10 more. Substitute compatibility should be verified for your specific system.
Is 14B1 1-2INID still available?
14B1 1-2INID is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14B1 1-2INID

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026