PartsTable
Technical Data Sheet
PartsTable / MRO / 14984-1
14984-1 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The HOLDER,TAPE GUIDE is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL, special_features: 0.818 IN. H IN, fsc_application_data: TELETYPE AND FACSIMILE EQUIPMENT.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5365-00-536-9990, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 14984-1
NSN: 5365-00-536-9990
FSC: 5365
CAGE: 98889 — AEROCONTROLEX GROUP, INC. DIV TALLEY ACTUATORS (USA)
SPECIFICATIONS
materialSTEEL
special_features0.818 IN. H IN
fsc_application_dataTELETYPE AND FACSIMILE EQUIPMENT
NSN5365-00-536-9990
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available HOLDER,TAPE GUIDE TITLE COMPONENT PN 14984-1 MFR HOLDER,TAPE GUIDE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.250 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.25 INCHES NOMINAL IN
•
OVERALL THICKNESS: 0.010 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OR STEEL COMP 301 OR STEEL COMP 302
•
STYLE DESIGNATOR: NON-CIRCULAR W/BOLT HOLES
•
APERTURE DIAMETER: 1.328 INCHES NOMINAL IN
•
CONSTRUCTION: ONE-PIECE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.250 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.25 INCHES NOMINAL IN
OVERALL THICKNESS0.010 INCHES NOMINAL IN
OVERALL LENGTH1.75 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OR STEEL COMP 301 OR STEEL COMP 302
STYLE DESIGNATORNON-CIRCULAR W/BOLT HOLES
APERTURE DIAMETER1.328 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A480 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A666 301/302 1/2 HARD THRU FULL HARD ASSN STD SINGLE MATERIAL RESPONSE
SPECIAL FEATURESALONG THE TOP EDGE THERE IS A 0.78 WIDE AND 0.125 DEEP CUT OUT CENTERALLY LOCATED ALONG THE TOP EDGE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
149841Interchangeable
interchangeable cross-reference
interchangeable
3847998Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14984-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14984-1?
14984-1 is a HOLDER,TAPE GUIDE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 14984-1?
There are 2 known substitutes for 14984-1: 149841, 3847998. Substitute compatibility should be verified for your specific system.
What is the NSN for 14984-1?
14984-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5365-00-536-9990. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14984-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026