PartsTable
Technical Data Sheet
Download PDF

149483 — NUT,PLAIN,SLOTTED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

149483: NUT,PLAIN,SLOTTED,HEXAGON.

The NUT,PLAIN,SLOTTED,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8740 OVERALL, nut_style: SLOTTED, HEXAGON, nut_height: 0.266 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNF, hardness_rating: 19.0 ROCKWELL C MINIMUM AND 24.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-880-9241, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
149483
NSN: 5310-00-880-9241
FSC: 5310 — Nuts and Washers
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 8740 OVERALL
nut_styleSLOTTED, HEXAGON
nut_height0.266 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
hardness_rating19.0 ROCKWELL C MINIMUM AND 24.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL NUT
width_across_flats0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
nominal_thread_size0.375 INCHES IN
bearing_surface_typeWASHER FACED
bearing_surface_finish125.0 MICROINCHES
NSN5310-00-880-9241
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 149483 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
THREAD SERIES: UNF
•
HARDNESS RATING: 19.0 ROCKWELL C MINIMUM AND 24.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6325 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NUT HEIGHT: 0.266 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
THREAD SERIESUNF
HARDNESS RATING19.0 ROCKWELL C MINIMUM AND 24.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6325 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT HEIGHT0.266 INCHES NOMINAL IN
COUNTERSINK ANGLE90.0 DEGREES NOMINAL NUT
NUT STYLESLOTTED, HEXAGON
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 149483?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 149483?
149483 is a NUT,PLAIN,SLOTTED,HEXAGON.
What is the NSN for 149483?
149483 is cataloged in the U.S. Government catalog under NSN 5310-00-880-9241. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 149483