PartsTable
Technical Data Sheet
Download PDF

1492-N25 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1492-N25: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_length: 0.690 INCHES NOMINAL IN, special_features: 3 MOUNTING HOLES, style_designator: OFFSET DOUBLE ANGLE, second_leg_length: 0.690 INCHES NOMINAL IN, second_leg_thickness: 0.130 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-493-4549, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1492-N25
NSN: 5340-01-493-4549
FSC: 5340 — Hardware, Commercial
CAGE: 01121 — ROCKWELL AUTOMATION, INC. DBA ROCKWELL AUTOMATION (USA)
SPECIFICATIONS
materialSTEEL
first_leg_length0.690 INCHES NOMINAL IN
special_features3 MOUNTING HOLES
style_designatorOFFSET DOUBLE ANGLE
second_leg_length0.690 INCHES NOMINAL IN
second_leg_thickness0.130 INCHES NOMINAL IN
first_leg_offset_angle30.0 DEGREES NOMINAL
end_item_identificationTERMINAL BOARD
center_section_thickness0.120 INCHES NOMINAL IN
NSN5340-01-493-4549
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1492-N25 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER SECTION THICKNESS: 0.120 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 0.690 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OFFSET DOUBLE ANGLE
•
SECOND LEG THICKNESS: 0.130 INCHES NOMINAL IN
•
FIRST LEG LENGTH: 0.690 INCHES NOMINAL IN
•
FIRST LEG OFFSET ANGLE: 30.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
CENTER SECTION THICKNESS0.120 INCHES NOMINAL IN
SECOND LEG LENGTH0.690 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET DOUBLE ANGLE
SECOND LEG THICKNESS0.130 INCHES NOMINAL IN
FIRST LEG LENGTH0.690 INCHES NOMINAL IN
FIRST LEG OFFSET ANGLE30.0 DEGREES NOMINAL
SPECIAL FEATURES3 MOUNTING HOLES
END ITEM IDENTIFICATIONTERMINAL BOARD
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
HCP-C2S-029 ISSUE 3 ITEM 16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1492-N25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1492-N25?
1492-N25 is a BRACKET,DOUBLE ANGLE.
What parts can replace 1492-N25?
There is 1 known substitute for 1492-N25: HCP-C2S-029 ISSUE 3 ITEM 16. Substitute compatibility should be verified for your specific system.
What is the NSN for 1492-N25?
1492-N25 is cataloged in the U.S. Government catalog under NSN 5340-01-493-4549. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1492-N25

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.