PartsTable
Technical Data Sheet
Download PDF

14917-2 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

14917-2: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, bore_type: STRAIGHT, face_type: STEP CONE, face_width: 1.780 INCHES NOMINAL IN, bore_length: 1.125 INCHES NOMINAL IN, design_form: WEBBED. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0239, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14917-2
NSN: 3110-00-100-0239
NIINs: 001000239, 004859320, 012067526
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 06375 — BEARD L O TOOL CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_typeSTRAIGHT
face_typeSTEP CONE
face_width1.780 INCHES NOMINAL IN
bore_length1.125 INCHES NOMINAL IN
design_formWEBBED
thread_size0.562-18
bore_bearingNOT INCLUDED
groove_depth1.310 INCHES NOMINAL AND 1.390 INCHES NOMINAL IN
groove_shapeV
groove_width0.611 INCHES NOMINAL AND 0.688 INCHES NOMINAL IN
bore_diameter0.656 INCHES NOMINAL IN
NSN3110-00-100-0239
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 14917-2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.1450 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.6250 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.1450 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.6250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
5137HAReference document
Same NSN cross-reference
Reference document — Secondary reference
X419Reference document
Same NSN cross-reference
Reference document — Secondary reference
507891Reference document
Same NSN cross-reference
Reference document — Secondary reference
503234Reference document
Same NSN cross-reference
Reference document — Secondary reference
419Reference document
Same NSN cross-reference
Reference document — Secondary reference
0211566-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 14917-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14917-2?
14917-2 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 14917-2?
There are 9 known substitutes for 14917-2: 5137HA, X419, 507891 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14917-2?
14917-2 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0239. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14917-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.