PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 149-400
149-400 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include lens_legend: TEST;MANUAL SINGLE LIGHT FIRST POSITION HORIZONTAL FULL DISPLAY DIVISION A, overall_width: 1.200 INCHES NOMINAL IN, overall_height: 0.960 INCHES NOMINAL IN, overall_length: 1.750 INCHES MAXIMUM IN, special_features: W/DRIPPROOF SEAL, style_designator: RECTANGULAR FRAME TYPE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-014-9400, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
149-400
NSN: 5305-00-014-9400
FSC: 5305
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
lens_legendTEST;MANUAL SINGLE LIGHT FIRST POSITION HORIZONTAL FULL DISPLAY DIVISION A
overall_width1.200 INCHES NOMINAL IN
overall_height0.960 INCHES NOMINAL IN
overall_length1.750 INCHES MAXIMUM IN
special_featuresW/DRIPPROOF SEAL
style_designatorRECTANGULAR FRAME TYPE
lamp_type_accommodated_and_quantity4 INCANDESCENT
hazardous_locations/environmental_protectionRADIO FREQUENCY INTERFERENCE
NSN5305-00-014-9400
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 149-400 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
HEAD STYLE: FLAT COUNTERSUNK
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2C STYLE
•
MATERIAL: COPPER ALLOY OVERALL
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
FASTENER LENGTH: 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
HEAD STYLEFLAT COUNTERSUNK
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626,COMP 6 OR 7 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2C STYLE
MATERIALCOPPER ALLOY OVERALL
NONMACHINE NOMINAL THREAD DIAMETER0.216 INCHES IN
FASTENER LENGTH2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
HEAD DIAMETER0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
7EQ1201Interchangeable
interchangeable cross-reference
interchangeable
K1003Interchangeable
interchangeable cross-reference
interchangeable
570918Interchangeable
interchangeable cross-reference
interchangeable
P149-400Interchangeable
interchangeable cross-reference
interchangeable
149-400Interchangeable
interchangeable cross-reference
interchangeable
39-909Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 149-400?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 149-400?
149-400 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 149-400?
There are 9 known substitutes for 149-400: 7EQ1201, K1003, 570918 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 149-400?
149-400 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-014-9400. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 149-400

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026