PartsTable
Technical Data Sheet
Download PDF

1489266-0125 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

1489266-0125: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.017 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, thread_length: 0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, screw_material: COPPER ALLOY 360. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-045-7532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1489266-0125
NSN: 5305-00-045-7532
NIINs: 000457532, 000821416
FSC: 5305 — Screws
CAGE: 02987 — HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX FLIGHT SYSTEMS FIV MONTROSE OPNS (USA)
SPECIFICATIONS
head_stylePAN
head_height0.017 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
thread_length0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY 360
fastener_length0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.060 INCHES IN
screw_surface_treatmentOXIDE
thread_quantity_per_inch80
NSN5305-00-045-7532
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1489266-0125 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.017 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: OXIDE
•
FASTENER LENGTH: 0.125 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.105 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.060 INCHES IN
•
HEAD STYLE: BINDING
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.017 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTOXIDE
FASTENER LENGTH0.125 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.105 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.060 INCHES IN
HEAD STYLEBINDING
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALCOPPER ALLOY 360
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES 1
1489266-125Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1489266-0125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1489266-0125?
1489266-0125 is a SCREW,MACHINE.
What parts can replace 1489266-0125?
There is 1 known substitute for 1489266-0125: 1489266-125. Substitute compatibility should be verified for your specific system.
What is the NSN for 1489266-0125?
1489266-0125 is cataloged in the U.S. Government catalog under NSN 5305-00-045-7532. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1489266-0125

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.