PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 148432
148432 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include length: 110.000 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR, cross-sectional_width: 2.500 INCHES NOMINAL IN, cross-sectional_height: 0.060 INCHES NOMINAL IN, cross-sectional_shape_style: RECTANGULAR, nonmetallic_hardness_rating: 60.0 MINIMUM SHORE DUROMETER A AND 80.0 MAXIMUM SHORE DUROMETER A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-3060, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
148432
NSN: 3110-00-120-3060
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
length110.000 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR
cross-sectional_width2.500 INCHES NOMINAL IN
cross-sectional_height0.060 INCHES NOMINAL IN
cross-sectional_shape_styleRECTANGULAR
nonmetallic_hardness_rating60.0 MINIMUM SHORE DUROMETER A AND 80.0 MAXIMUM SHORE DUROMETER A
NSN3110-00-120-3060
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 148432 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.7500 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
OVERALL OUTSIDE DIAMETER: 1.0000 INCHES NOMINAL IN
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.7500 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
OVERALL OUTSIDE DIAMETER1.0000 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
148432H1Interchangeable
interchangeable cross-reference
interchangeable
148432Interchangeable
interchangeable cross-reference
interchangeable
709446Interchangeable
interchangeable cross-reference
interchangeable
1484 ITEM 94Interchangeable
interchangeable cross-reference
interchangeable
1484-26Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 148432?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 148432?
148432 is a BEARING,ROLLER,NEEDLE.
What parts can replace 148432?
There are 5 known substitutes for 148432: 148432H1, 148432, 709446 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 148432?
148432 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-3060. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 148432

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026