PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 14835NPC11148
14835NPC11148 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, gage_thickness: 0.005 INCHES NOMINAL IN, outside_diameter: 1.000 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.469 INCHES NOMINAL IN, center_to_center_distance: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-799-9159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14835NPC11148
NSN: 5330-00-799-9159
FSC: 5330
CAGE: 35795 — LESLIE CONTROLS, INC. DBA LESLIE CONTROLS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
gage_thickness0.005 INCHES NOMINAL IN
outside_diameter1.000 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.469 INCHES NOMINAL IN
center_to_center_distance0.062 INCHES NOMINAL IN
cross-sectional_thickness0.025 INCHES NOMINAL IN
cross-sectional_shape_styleMETAL
material_document_and_classificationQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-799-9159
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14835NPC11148 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GAGE THICKNESS: 0.005 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: METAL
•
CROSS-SECTIONAL THICKNESS: 0.025 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: STEEL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
GAGE THICKNESS0.005 INCHES NOMINAL IN
OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL
CROSS-SECTIONAL THICKNESS0.025 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
APERTURE DIAMETER0.469 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
BS1311PC710Interchangeable
interchangeable cross-reference
interchangeable
BS5-1417PC740Interchangeable
interchangeable cross-reference
interchangeable
BS5-1415PC710Interchangeable
interchangeable cross-reference
interchangeable
11148Interchangeable
interchangeable cross-reference
interchangeable
011148Interchangeable
interchangeable cross-reference
interchangeable
7376248Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14835NPC11148?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14835NPC11148?
14835NPC11148 is a GASKET.
What parts can replace 14835NPC11148?
There are 13 known substitutes for 14835NPC11148: BS1311PC710, BS5-1417PC740, BS5-1415PC710 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14835NPC11148?
14835NPC11148 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-799-9159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14835NPC11148

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026