PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 14828M1P
14828M1P ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.313 INCHES NOMINAL IN, housing_bore_diameter: 1.499 INCHES NOMINAL IN, sealing_element_style: VERTICAL-ANGULAR, accommodated_shaft_diameter: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-992-6838, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14828M1P
NSN: 5330-00-992-6838
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.313 INCHES NOMINAL IN
housing_bore_diameter1.499 INCHES NOMINAL IN
sealing_element_styleVERTICAL-ANGULAR
accommodated_shaft_diameter0.875 INCHES NOMINAL IN
NSN5330-00-992-6838
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14828M1P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.313 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 0.875 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
SEALING ELEMENT STYLE: VERTICAL-ANGULAR
•
HOUSING BORE DIAMETER: 1.499 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.313 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER0.875 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEALING ELEMENT STYLEVERTICAL-ANGULAR
HOUSING BORE DIAMETER1.499 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
ASTM-D1974Interchangeable
interchangeable cross-reference
interchangeable
01092AInterchangeable
interchangeable cross-reference
interchangeable
ASTM-D4727Interchangeable
interchangeable cross-reference
interchangeable
506604Interchangeable
interchangeable cross-reference
interchangeable
8703Interchangeable
interchangeable cross-reference
interchangeable
8697Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14828M1P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14828M1P?
14828M1P is a SEAL,PLAIN ENCASED.
What parts can replace 14828M1P?
There are 8 known substitutes for 14828M1P: ASTM-D1974, 01092A, ASTM-D4727 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14828M1P?
14828M1P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-992-6838. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14828M1P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026