PartsTable
Technical Data Sheet
Download PDF

14819-1 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

14819-1: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321 OVERALL, fork_depth: 0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN, shank_length: 1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN, overall_width: 0.430 INCHES MINIMUM AND 0.444 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-440-5472, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14819-1
NSN: 5340-00-440-5472
FSC: 5340 — Hardware, Commercial
CAGE: 78710 — TRIUMPH CONTROLS, LLC DBA TRIUMPH CONTROLS, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 321 OVERALL
fork_depth0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
shank_length1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
thread_class3B ROD CONNECTION
hole_diameter0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
overall_width0.430 INCHES MINIMUM AND 0.444 INCHES MAXIMUM IN
thread_length0.830 INCHES MINIMUM ROD CONNECTION IN
overall_height0.430 INCHES MINIMUM AND 0.444 INCHES MAXIMUM IN
shank_diameter0.312 INCHES NOMINAL IN
fork_span_width0.240 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
NSN5340-00-440-5472
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14819-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.312 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.240 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.062 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.098 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END: 0.120 INCHES NOMINAL IN
•
THREAD LENGTH: 0.830 INCHES MINIMUM ROD CONNECTION IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.312 INCHES NOMINAL IN
OVERALL HEIGHT0.430 INCHES MINIMUM AND 0.444 INCHES MAXIMUM IN
FORK SPAN WIDTH0.240 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.062 INCHES NOMINAL IN
FORK ARM THICKNESS0.098 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END0.120 INCHES NOMINAL IN
THREAD LENGTH0.830 INCHES MINIMUM ROD CONNECTION IN
SHANK LENGTH1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
STYLE DESIGNATORCLEVIS
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 14819-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14819-1?
14819-1 is a CLEVIS,ROD END.
What is the NSN for 14819-1?
14819-1 is cataloged in the U.S. Government catalog under NSN 5340-00-440-5472. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14819-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.