PartsTable
Technical Data Sheet
Download PDF

1480AS108-1 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1480AS108-1: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.120 INCHES NOMINAL0.120 INCHES NOMINAL IN, diameter: 0.559 INCHES MINIMUM AND 0.559 INCHES MINIMUM AND 0.561 INCHES MAXIMUM0.561 INCHES MAXIMUM IN, head_style: FLAT CHAMFERFLAT CHAMFER, chamfer_length: 0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN, style_designator: STRAIGHTSTRAIGHT, pin_chamfer_angle: 45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-332-7491, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1480AS108-1
NSN: 5315-01-332-7491
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
height0.120 INCHES NOMINAL0.120 INCHES NOMINAL IN
diameter0.559 INCHES MINIMUM AND 0.559 INCHES MINIMUM AND 0.561 INCHES MAXIMUM0.561 INCHES MAXIMUM IN
head_styleFLAT CHAMFERFLAT CHAMFER
chamfer_length0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN
style_designatorSTRAIGHTSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL
pin_head_diameter0.880 INCHES NOMINAL0.880 INCHES NOMINAL IN
under_head_length2.590 INCHES NOMINAL2.590 INCHES NOMINAL IN
first_hole_diameter0.220 INCHES NOMINAL0.220 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLEDONE END DRILLED
distance_from_centerline_of_hole_to_end_of_pin0.220 INCHES MINIMUM AND 0.220 INCHES MINIMUM AND 0.250 INCHES MAXIMUM0.250 INCHES MAXIMUM IN
NSN5315-01-332-7491
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1480AS108-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLEDONE END DRILLED
•
UNDER HEAD LENGTH: 2.590 INCHES NOMINAL2.590 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.220 INCHES NOMINAL0.220 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHTSTRAIGHT
•
PIN HEAD DIAMETER: 0.880 INCHES NOMINAL0.880 INCHES NOMINAL IN
•
DIAMETER: 0.559 INCHES MINIMUM AND 0.559 INCHES MINIMUM AND 0.561 INCHES MAXIMUM0.561 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.060 INCHES NOMINAL0.060 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLEDONE END DRILLED
UNDER HEAD LENGTH2.590 INCHES NOMINAL2.590 INCHES NOMINAL IN
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL45.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.220 INCHES NOMINAL0.220 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHTSTRAIGHT
PIN HEAD DIAMETER0.880 INCHES NOMINAL0.880 INCHES NOMINAL IN
DIAMETER0.559 INCHES MINIMUM AND 0.559 INCHES MINIMUM AND 0.561 INCHES MAXIMUM0.561 INCHES MAXIMUM IN
HEAD STYLEFLAT CHAMFERFLAT CHAMFER
HEIGHT0.120 INCHES NOMINAL0.120 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1480AS108-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1480AS108-1?
1480AS108-1 is a PIN,STRAIGHT,HEADED.
What is the NSN for 1480AS108-1?
1480AS108-1 is cataloged in the U.S. Government catalog under NSN 5315-01-332-7491. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1480AS108-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.