PartsTable
Technical Data Sheet

14783LPDWH1/L5 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

14783LPDWH1/L5: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT, seal_width: 0.500 INCHES NOMINAL IN, construction: ONE-PIECE, hardness_rating: 77.0 SHORE DUROMETER A NOMINAL SEALING ELEMENT, housing_bore_diameter: 3.000 INCHES NOMINAL IN, accommodated_shaft_diameter: 2.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-641-1388, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14783LPDWH1/L5
NSN: 5330-00-641-1388
NIINs: 006411388, 012665041
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
seal_width0.500 INCHES NOMINAL IN
constructionONE-PIECE
hardness_rating77.0 SHORE DUROMETER A NOMINAL SEALING ELEMENT
housing_bore_diameter3.000 INCHES NOMINAL IN
accommodated_shaft_diameter2.000 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-641-1388
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14783LPDWH1/L5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.500 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL: STEEL SPRING
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.500 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER2.000 INCHES NOMINAL IN
MATERIALSTEEL SPRING
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 3
1478LPDW/H1/L5Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
00150Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
CR10M-55Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 14783LPDWH1/L5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14783LPDWH1/L5?
14783LPDWH1/L5 is a SEAL,PLAIN.
What parts can replace 14783LPDWH1/L5?
There are 3 known substitutes for 14783LPDWH1/L5: 1478LPDW/H1/L5, 00150, CR10M-55. Substitute compatibility should be verified for your specific system.
What is the NSN for 14783LPDWH1/L5?
14783LPDWH1/L5 is cataloged in the U.S. Government catalog under NSN 5330-00-641-1388. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14783LPDWH1/L5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.