PartsTable
Technical Data Sheet
PartsTable / MRO / 1477-3
1477-3 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- The new Clemmy pets are super cute!<br>- 4 cute pet characters and 10 soft and colourful bricks to stimulate manual skills and imagination.<br><br>- Manual abilites<br>- Imagination<br>- Soft and safe This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-075-9550, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1477-3
NSN: 5340-00-075-9550
FSC: 5340
CAGE: 0UES3 — MID-AMERICA AEROTECH, LLC (USA)
SPECIFICATIONS
length7.140 MILLIMETERS NOMINAL SQUARE END MM
materialSTEEL OVERALL
body_styleW/MTG TABS/FLANGES TERMINALS ON OPPOSITE SURFACES
body_width1.000 INCHES NOMINAL IN
body_height0.875 INCHES NOMINAL IN
body_length1.812 INCHES NOMINAL IN
design_typeSOLID
thread_length25.400 MILLIMETERS MINIMUM MM
flute_quantity4
overall_length60.300 MILLIMETERS NOMINAL MM
shank_diameter4.930 MILLIMETERS NOMINAL MM
section_quantity2
NSN5340-00-075-9550
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1477-3 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: SOLID
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6, ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: ALUMINUM ALLOY 2024
•
FSC APPLICATION DATA: AIRCRAFT HYDRAULIC,VACUUM,DEICING SYSTEMS
•
SURFACE TREATMENT: ANODIZE
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPESOLID
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6, ALLOY 2024 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 2024
FSC APPLICATION DATAAIRCRAFT HYDRAULIC,VACUUM,DEICING SYSTEMS
SURFACE TREATMENTANODIZE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
B94.9Interchangeable
interchangeable cross-reference
interchangeable
14773Interchangeable
interchangeable cross-reference
interchangeable
54374Interchangeable
interchangeable cross-reference
interchangeable
DV-3-5Interchangeable
interchangeable cross-reference
interchangeable
1477Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1477-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1477-3?
1477-3 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1477-3?
There are 5 known substitutes for 1477-3: B94.9, 14773, 54374 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1477-3?
1477-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-075-9550. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1477-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026