PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1475HX
1475HX ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.375 INCHES NOMINAL IN, thread_length: 0.391 INCHES MINIMUM IN, screw_material: STEEL, fastener_length: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-777-2284, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1475HX
NSN: 5305-00-777-2284
FSC: 5305
CAGE: 45152 — OSHKOSH CORP (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.375 INCHES NOMINAL IN
thread_length0.391 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM
thread_quantity_per_inch32
NSN5305-00-777-2284
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1475HX · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL DRIVE STYLE: SLOT
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.391 INCHES MINIMUM IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
THREAD QUANTITY PER INCH: 32
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL DRIVE STYLESLOT
FASTENER LENGTH0.500 INCHES NOMINAL IN
THREAD LENGTH0.391 INCHES MINIMUM IN
HEAD STYLEFLAT COUNTERSUNK
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.190 INCHES IN
THREAD QUANTITY PER INCH32
THREAD SERIES DESIGNATORUNF
SCREW MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
5-1304SPInterchangeable
interchangeable cross-reference
interchangeable
R1304BFInterchangeable
interchangeable cross-reference
interchangeable
18-4625AInterchangeable
interchangeable cross-reference
interchangeable
30-4088Interchangeable
interchangeable cross-reference
interchangeable
5867173562Interchangeable
interchangeable cross-reference
interchangeable
SK17-3562Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1475HX?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1475HX?
1475HX is a SCREW,MACHINE.
What parts can replace 1475HX?
There are 16 known substitutes for 1475HX: 5-1304SP, R1304BF, 18-4625A and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1475HX?
1475HX is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-777-2284. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1475HX

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026