PartsTable
Technical Data Sheet
PartsTable / MRO / 147415-1

147415-1 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,VARIABLE,AIR DIELECTRI. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, body_style: PISTONPISTON, body_length: 0.297 INCHES NOMINAL0.297 INCHES NOMINAL IN, shank_length: 0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, bushing_shape: ROUNDROUND, bushing_length: 0.109 INCHES NOMINAL0.109 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-069-5298, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 147415-1
NSN: 5315-01-069-5298
FSC: 5315
CAGE: 64547 — HONEYWELL INTERNATIONAL, INC DIV AEROSPACE-TUCSON (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
body_stylePISTONPISTON
body_length0.297 INCHES NOMINAL0.297 INCHES NOMINAL IN
shank_length0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
bushing_shapeROUNDROUND
bushing_length0.109 INCHES NOMINAL0.109 INCHES NOMINAL IN
inclosure_typeENCASEDENCASED
overall_length0.547 INCHES NOMINAL0.547 INCHES NOMINAL IN
shank_diameter0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
surface_finish125.0 MICROINCHES OVERALL
first_end_styleCHAMFERED
bushing_diameter0.100 INCHES NOMINAL0.100 INCHES NOMINAL IN
NSN5315-01-069-5298
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 147415-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
MATERIAL: ALUMINUM ALLOY 6061 OVERALL
•
STYLE DESIGNATOR: SHOULDER
•
SURFACE TREATMENT: ANODIZE OVERALL
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
SHANK DIAMETER: 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END LOCATIONBOTH ENDS
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
MATERIALALUMINUM ALLOY 6061 OVERALL
STYLE DESIGNATORSHOULDER
SURFACE TREATMENTANODIZE OVERALL
SURFACE FINISH125.0 MICROINCHES OVERALL
SHANK DIAMETER0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM IN
OVERALL LENGTH0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
SHANK LENGTH0.160 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
SHOULDER DIAMETER0.170 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
5401Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 147415-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 147415-1?
147415-1 is a CAPACITOR,VARIABLE,AIR DIELECTRI. It is classified as a MRO (MRO_GENERAL).
What parts can replace 147415-1?
There is 1 known substitute for 147415-1: 5401. Substitute compatibility should be verified for your specific system.
What is the NSN for 147415-1?
147415-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-069-5298. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 147415-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026