PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 147184
147184 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PUMP,FUEL,METERING AND DISTRIBUT. Key specifications include end_item_identification: 6115-00-465-1030. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-225-2958, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
147184
NSN: 5330-00-225-2958
FSC: 5330
CAGE: 21877 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
end_item_identification6115-00-465-1030
NSN5330-00-225-2958
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 147184 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 27.625 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 27.633 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 5000 FEET PER MINUTE FT
•
CASE STYLE: RECESSED
•
SEAL WIDTH: 0.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER27.625 INCHES NOMINAL IN
OUTSIDE DIAMETER27.633 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED5000 FEET PER MINUTE FT
CASE STYLERECESSED
SEAL WIDTH0.750 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER26.000 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
147184Interchangeable
interchangeable cross-reference
interchangeable
134026Interchangeable
interchangeable cross-reference
interchangeable
2600330Interchangeable
interchangeable cross-reference
interchangeable
147C184Interchangeable
interchangeable cross-reference
interchangeable
50-2/4A-80A-9540AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 147184?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 147184?
147184 is a PUMP,FUEL,METERING AND DISTRIBUT.
What parts can replace 147184?
There are 5 known substitutes for 147184: 147184, 134026, 2600330 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 147184?
147184 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-225-2958. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 147184

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026