PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1469-10
1469-10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET SET is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, thread_length: 0.875 INCHES MINIMUM IN, screw_material: STEEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-127-9914, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1469-10
NSN: 5330-00-127-9914
FSC: 5330
CAGE: 66935 — JOHNSON CONTROLS NAVY SYSTEMS, LLC (USA)
SPECIFICATIONS
head_stylePAN
head_height0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_length0.875 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.875 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
NSN5330-00-127-9914
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1469-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DOCUMENT TYPE: INDUSTRIAL DRAWING
•
COMPONENT DOCUMENT ORIGIN: INDUSTRIAL
•
DOCUMENT SOURCE: 66935
•
USAGE LOCATION: CONUS
•
DOCUMENT IDENTIFICATION: 17600PC34
TECHNICAL CHARACTERISTICS (FLIS)
DOCUMENT TYPEINDUSTRIAL DRAWING
COMPONENT DOCUMENT ORIGININDUSTRIAL
DOCUMENT SOURCE66935
USAGE LOCATIONCONUS
DOCUMENT IDENTIFICATION17600PC34
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1469-10Interchangeable
interchangeable cross-reference
interchangeable
MS35206-248Interchangeable
interchangeable cross-reference
interchangeable
194-23AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1469-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1469-10?
1469-10 is a GASKET SET.
What parts can replace 1469-10?
There are 3 known substitutes for 1469-10: 1469-10, MS35206-248, 194-23A. Substitute compatibility should be verified for your specific system.
What is the NSN for 1469-10?
1469-10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-127-9914. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1469-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026