PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 146398PC4
146398PC4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include angle: 15.0 DEGREES NOMINAL, material: RUBBER SYNTHETIC OVERALL, rim_surface_width: 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN, inner_groove_width: 0.095 INCHES NOMINAL IN, peripheral_diameter: 0.812 INCHES MINIMUM AND 0.827 INCHES MAXIMUM IN, center_hole_diameter: 0.562 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-3629, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
146398PC4
NSN: 5330-00-297-3629
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
angle15.0 DEGREES NOMINAL
materialRUBBER SYNTHETIC OVERALL
rim_surface_width0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
inner_groove_width0.095 INCHES NOMINAL IN
peripheral_diameter0.812 INCHES MINIMUM AND 0.827 INCHES MAXIMUM IN
center_hole_diameter0.562 INCHES NOMINAL IN
cross-sectional_height0.187 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-297-3629
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 146398PC4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ANGLE: 15.0 DEGREES NOMINAL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 0.812 INCHES MINIMUM AND 0.827 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.562 INCHES NOMINAL IN
•
INNER GROOVE WIDTH: 0.095 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.187 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
ANGLE15.0 DEGREES NOMINAL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER0.812 INCHES MINIMUM AND 0.827 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.562 INCHES NOMINAL IN
INNER GROOVE WIDTH0.095 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.187 INCHES NOMINAL IN
RIM SURFACE WIDTH0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
271678PC2Interchangeable
interchangeable cross-reference
interchangeable
146392PC21Interchangeable
interchangeable cross-reference
interchangeable
12Z62PC7Interchangeable
interchangeable cross-reference
interchangeable
5330-207Interchangeable
interchangeable cross-reference
interchangeable
271744PC5Interchangeable
interchangeable cross-reference
interchangeable
299496PC5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 146398PC4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 146398PC4?
146398PC4 is a PACKING,PREFORMED.
What parts can replace 146398PC4?
There are 20 known substitutes for 146398PC4: 271678PC2, 146392PC21, 12Z62PC7 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 146398PC4?
146398PC4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-297-3629. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 146398PC4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026