PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 14612A
14612A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, outside_diameter: 1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-404-5083, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
14612A
NSN: 5330-00-404-5083
FSC: 5330
CAGE: 14487 — PROVISION, INC. DBA PROVISION INC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
outside_diameter1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-404-5083
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14612A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
STYLE DESIGNATOR: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
APERTURE DIAMETER0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
STYLE DESIGNATORCIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
10-912-2-05Interchangeable
interchangeable cross-reference
interchangeable
1461-2Interchangeable
interchangeable cross-reference
interchangeable
10025905-103Interchangeable
interchangeable cross-reference
interchangeable
B94.9Interchangeable
interchangeable cross-reference
interchangeable
A-A-625Interchangeable
interchangeable cross-reference
interchangeable
B94.9 1-1/4-7 UNC HS G H4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14612A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14612A?
14612A is a GASKET.
What parts can replace 14612A?
There are 14 known substitutes for 14612A: 10-912-2-05, 1461-2, 10025905-103 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 14612A?
14612A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-404-5083. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14612A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026