PartsTable
Technical Data Sheet
1461-5 ✓ Verified by PartsTable
schleich · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

Related to horses and rhinoceroses, tapirs tend to reach lengths of seven feet and stand three feet tall, weighing up to seven hundred pounds. Wearing short coats of red brown, gray, or black, adult tapirs raise young, wearing striped and spotted coats for protection. Possessing a probing proboscis, tapirs take down leaves and food that would be out of their reach without it.

Living for three decades, tapirs enjoy swimming, wallowing in mud, foraging, and eating. Tapirs have been known to eat almost ninety pounds of food in one day! - Fun Fact : Tapirs have four toes on their front feet and three on the back ones. - Scientific Name : Tapirus indicus - Conservation Status : Endangered (EN) - Primary Habitat : Tropics - Global Home : Asia and Australia This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-609-4883, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
1461-5
NSN: 5325-00-609-4883
FSC: 5325
CAGE: 59501 — UNISON INDUSTRIES LLC (USA)
SPECIFICATIONS
length0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
head_styleHEXAGON
body_length2.500 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
hardness_rating70.0 SHORE DUROMETER A NOMINAL OVERALL
mounting_methodUNTHREADED HOLE(S) SINGLE GROUP
terminal_designNONFEEDTHRU
flange_thickness0.060 INCHES NOMINAL IN
outside_diameter53.0 MILLIMETERS NOMINAL MM
special_featuresLENGTH IS 3 INCHES; IN
special_markings1-2-3-4-5
NSN5325-00-609-4883
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1461-5 · schleich ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
WIDTH ACROSS FLATS: 0.670 INCHES MINIMUM AND 0.675 INCHES MAXIMUM IN
FLANGE THICKNESS: 0.060 INCHES NOMINAL IN
LENGTH: 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
STYLE DESIGNATOR: FLANGE
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH ACROSS FLATS0.670 INCHES MINIMUM AND 0.675 INCHES MAXIMUM IN
FLANGE THICKNESS0.060 INCHES NOMINAL IN
LENGTH0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
STYLE DESIGNATORFLANGE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
14615Interchangeable
interchangeable cross-reference
interchangeable
07-01-7051Interchangeable
interchangeable cross-reference
interchangeable
706520-116Interchangeable
interchangeable cross-reference
interchangeable
3542Interchangeable
interchangeable cross-reference
interchangeable
3742Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1461-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1461-5?
1461-5 is a TERMINAL BOARD manufactured by schleich.
What parts can replace 1461-5?
There are 5 known substitutes for 1461-5: 14615, 07-01-7051, 706520-116 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1461-5?
1461-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-609-4883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1461-5